Mockie
Active member
I need to save my UPG on my FR8X to USB memory and ultimately to my laptop.
Exporting/ Saving, all my UPGs to USB memory.?
- Thread starter Mockie
- Start date
Mockie
Active member
To where do I Export them. System?
You export to a USB drive.
Insert USB memory into FR-8X USB port. The following procedure Exports SETS and UPG's. Doing this saves all the SETS and User Programs that are in the 8X memory.
If you have a completely different or brand new 8X, Doing an "IMPORT" on these SETS and UPG's from the USB memory to the new accordion will give you an accordion identical to yours
EXPORT -- WRITING Sets To USB
Go To 15.8
Type -> SET
SET File -> ALL
● Press Write button on 8X
● Prompt comes up on screen “Export ALL Sets -- Press WRITE TO PROCEED”
● Press Write To Proceed
● File Name FR-8X_SET_ALL will appear
● Press Write To Proceed
● Screen will show “Writing” with “Operation Complete” when done.
EXPORT -- WRITING User Programs To USB
Go To 15.8
Type -> User Program
User Prog. File -> ALL
● Press Write button on 8X
● Prompt comes up on screen “Export All User Programs -- Press WRITE TO PROCEED”
● Press Write To Proceed
● File Name UPG_ALL will appear
● Press Write To Proceed
● Screen will show exporting all of the UPG Program Files (1-100) to the USB with “Operation Complete”
Hope this helps,
John M.
Edit -> Jerry posted his video while I was writing my procedure. His video is better than reading my boring procedure
If you have a completely different or brand new 8X, Doing an "IMPORT" on these SETS and UPG's from the USB memory to the new accordion will give you an accordion identical to yours
EXPORT -- WRITING Sets To USB
Go To 15.8
Type -> SET
SET File -> ALL
● Press Write button on 8X
● Prompt comes up on screen “Export ALL Sets -- Press WRITE TO PROCEED”
● Press Write To Proceed
● File Name FR-8X_SET_ALL will appear
● Press Write To Proceed
● Screen will show “Writing” with “Operation Complete” when done.
EXPORT -- WRITING User Programs To USB
Go To 15.8
Type -> User Program
User Prog. File -> ALL
● Press Write button on 8X
● Prompt comes up on screen “Export All User Programs -- Press WRITE TO PROCEED”
● Press Write To Proceed
● File Name UPG_ALL will appear
● Press Write To Proceed
● Screen will show exporting all of the UPG Program Files (1-100) to the USB with “Operation Complete”
Hope this helps,
John M.
Edit -> Jerry posted his video while I was writing my procedure. His video is better than reading my boring procedure
Last edited:
Mockie
Active member
Thanks guys
