REED PLATES AND REEDS HELP

[darticus]

Working on a couple Hohner Imperials Accordions a One and a IIA. The one needs a high G and High C reed plates with reeds and the IIA needs two reed plates and reeds also as the reeds bent in shipping. I'm new to this and try to fix things and sometimes get lucky but does anyone know where I can get the help I need? I am in the USA so this might be another problem. I thought I would try to straighten out the reeds but some say I can't. Maybe some use plates with reeds would do fine. I also need the r for the word Imperial. See Pics. Thanks Ron

 

[Soulsaver]

You may be lucky because the R is in HOHNER and I know you can get them... see below under nameplates - 8 mm in gold, 12mm in silver, I think both are metal.
You will be also able to buy the reed plate & tongues, too, maybe not T, and maybe dependant on size. Youll need to state the pitch. The shipping to the US from here (UK or Germany) will add to the cost, so maybe see what the US guys say.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

And while we are on that subject if anyone has a metal gold H 12mm going spare, Im after one... pretty please..

 

[darticus]

You may be lucky because the R is in HOHNER and I know you can get them... see below under nameplates - 8 mm in gold, 12mm in silver, I think both are metal.
You will be also able to buy the reed plate & tongues, too, maybe not T, and maybe dependant on size. Youll need to state the pitch. The shipping to the US from here (UK or Germany) will add to the cost, so maybe see what the US guys say.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

And while we are on that subject if anyone has a metal gold H 12mm going spare, Im after one... pretty please..

Thanks for the help. I think the r I need is the small letter r. Ron

 

[JIM D.]

Hi darticus: I have the reeds you need and many more. Where are you in the US ???.

 

[darticus]

Hi darticus: I have the reeds you need and many more. Where are you in the US ???.

Hi Jim
Im in Sparta New Jersey. Maybe you can help me get going correctly on fixing these things. I wanted to straighten the bent reeds but I dont know if that will work. Here is my email <EMAIL email=ron222@embarqmail.com>ron222@embarqmail.com</EMAIL>. Maybe you can get me going. Thanks Ron

 

[JIM D.]

Hi Ron; Check your email :tup:

 

[Soulsaver]

Many of us need the smaller Rs.. :lol:

 

[Soulsaver]

Bump: And while we are on that subject if anyone has a metal gold 'H' 12mm going spare, I'm after one... pretty please..