Roland FR-4X Right Hand Section & User Program

[k-man]

I have used the Roland Editor to modify my Accordion & Orchestra sounds. I have also set up User Program Sounds. Everything is great except for when I go to the User program sounds and then back to the Accordion & Orchestra, these sounds have changed for each register. The only way I get back to my modified setup is to turn the power off and back on. Does anyone know why switching to User Program and selecting the registers there change my Accordion & Orchestra sounds?

 

[Pbraido]

I have used the Roland Editor to modify my Accordion & Orchestra sounds. I have also set up User Program Sounds. Everything is great except for when I go to the User program sounds and then back to the Accordion & Orchestra, these sounds have changed for each register. The only way I get back to my modified setup is to turn the power off and back on. Does anyone know why switching to User Program and selecting the registers there change my Accordion & Orchestra sounds?

I would guess that when you go to your user program you are in user program mode so when you select another register you are actually selecting another user program. You need to exit user program mode and select your start up set where you have modified your accordion and orchestral sounds

 

[JerryPH]

That is because it is supposed to work that way. The default startup location for v-accordions is SET 1 Register 1, you then move to UPG mode and have access to those.

Of course moving back and forth from UPG mode to SETs will be different, they are different things!

Consider Roland SETS to be a different accordion per set. Cosnider UPGs to be your locations for your CUSTOM sounds/edits.

 

[Squeezeplay]

Jerry….
That single simple statement at the end of your post explains it more clearly than the several paragraphs in the manual.

 

[k-man]

Thank you very much everyone for the most helpful insights.