System Exclusive Message to control FR4x DIY project

[AlfPeter]

Hi Larry.
I was away all last week so I didn't get a chance to do anything with all the information you provided.

Thank you so much for all your help in my getting the FCB1010 working properly using MidiFlow. It is now working great!

Things I had to do:

1. Learn MidiFlow
2. Turn on the FC-300 on page 107 in the 14.8 MIDI Foot Controller.
3. Learn more about MidiFlow
4. Change 14.9 General Setting/USB driver to Original
5. Play more with the SysEx in MidiFlow. (learn to SAVE often.)

And now it works great! I'm going to document this setup for all the other FCB1010 users that have an FR-4x or FR-8x.

NOTE: The FC-300 has 15 Switches that it can control, but we only have the SysEx for 9 of them. It would be great to find the other 6 SysEx.

Thanks again.

 

[KeysFla]

Hi Larry.
I was away all last week so I didn't get a chance to do anything with all the information you provided.

Thank you so much for all your help in my getting the FCB1010 working properly using MidiFlow. It is now working great!

Things I had to do:

1. Learn MidiFlow
2. Turn on the FC-300 on page 107 in the 14.8 MIDI Foot Controller.
3. Learn more about MidiFlow
4. Change 14.9 General Setting/USB driver to Original
5. Play more with the SysEx in MidiFlow. (learn to SAVE often.)

And now it works great! I'm going to document this setup for all the other FCB1010 users that have an FR-4x or FR-8x.

NOTE: The FC-300 has 15 Switches that it can control, but we only have the SysEx for 9 of them. It would be great to find the other 6 SysEx.

Thanks again.

Great to hear. You are doing great on your own after a few suggestions. MidiFlow is a powerful app. Helped a Ketron owner whom is using Airstep pedals. He controls lighting as well as Ketron Event, which too is sysex.